SRAM Card | PCMCIA | Industrial Flash Storage | pako india

PCMCIA Type I
PCMCIA1.0/JEIDA4.0 (M86187)
Attribute Memory: 8K byte EE’PROM or no attribute memory
Dual back-up battery design and battery voltage detection function.

PRETEC PCMCIA SRAM Card conform to PCMCIA/JEIDA international standard and
consist of multiple very low power consumption CMOS SRAM ICs, decoder IC and
power control IC mounted on a very thin printed circuit board using surface
mounting technology. With the dual back-up battery design, each SRAM
card contains a replaceable but non-rechargeable 3V
lithium battery and an on-board rechargeable but
non-replaceable battery for data retention.
There is also a battery case lock system to prevent battery dropping
from the card. SRAM Cards are available with extended temprature option -40 to 85Deg.

SRAM Card | PCMCIA | Industrial Flash Storage | pako india

Windows XP DIRVER  for PC Card SRAM
Follow the procedure below for SRAM card driver under Windows XP

Insert the SRAM card into the PC Card slot
When the 'Hardware Wizard' appears, select 'Install from a list or specific location (advanced)'
Click 'Next'
Select 'Don't search I will choose the driver to install'
Click 'Next'
Scroll through the list of choice and select 'PCMCIA and Flash memory devices'
Click 'Next'
Double click 'generic' under the Manufacturer listing
Select 'Generic PCMCIA Memory Card' from the Model listing
Click 'Next'
Click the 'Yes' button when the warning dialog appears, to dismiss it
Click 'Finish' when the 'Completing the found new hardware wizard' dialog appears