HME-621 | Managed Industrial Switches | Industrial Ethernet

• 6 TX ( RJ45 ) ports 10/100
• 2 FX multimode ( 2km ) fiber ports with SC connectors
• Supports Full/Half Duplex, auto-negotiation, MDI/MDI-X on TX ports
• Supports SNMP / RMON network management
• Supports IntraVUE network software
• Supports X Ring Redundant ring on any 2 ports
• Supports RSTP redundancy
• Event notification by email, SNMP trap
• IGMP snooping – for I/O over ethernet/IP
• VLAN configuration
• QoS – 2 levels
• Configuration – Web Enabled, other software packages
• Web based configuration – using browser
• Alarm relay output for port loss, loss of power
• Redundant power inputs 12-48 VDC
• Rigid aluminum case – IP31
• DIN rail mountable
• Panel mountable – bracket furnished
• Temperature rating of -10 C to + 70 C
• UL, cUL, CE, FCC approvals
• MTBF 315,109 + hours
• 5 year global warranty
• Dimensions ( H x W x D )  5.75in x 2.0in x 4.5in     135mm x 54mm x 105mm

HME-621 | Managed Industrial Switches | Industrial Ethernet

Interface

RJ-45 Ports: 6 10/100Base-TX auto-negotiation speed, Full/Half duplex,

auto MDI/MDI-X

Fiber Ports: 2 100Base-FX multi-mode port (SC connector)

LEDs: Per port : Link/Activity (Green), Full duplex/Collision (Green)

Per unit: Power x 3 (Green), Fault (Red), R.M. (Orange)

DIP Switch: X-ring, Master, Port break alarm

Alarm: Relay output for port break and power failure

Power Input: VDC 12-48V

Redundant power with removable terminal block

Power Protection: Power Reverse Polarity

Power Consumption: 6.9 watts

Dimensions: IP-31 standard, 54 mm (W) x 135 mm (H) x 105 mm (D)

Installation: DIN-Rail, panel mounting or desktop

Environmental

Operating Temp: Regular: -10 to 70

Extended: -40 to 80

Storage Temp: -40 to 85 (-40 to 185 )

Operating Humidity: 5% to 90% RH (non-condensing)