HME-423E | Managed Industrail Switches | Industrial Ethernet

• 4 TX ( RJ45 ) ports 10/100
• 2 FX ( SC ) singlemode ports - 30km
• Supports Full/Half Duplex, auto-negotiation, MDI/MDI-X on TX ports
• Supports SNMP / RMON network management
• Supports IntraVUE network software
• Supports X Ring Redundant ring on any 2 ports
• Supports Dual Homing
• Supports Ring Coupling
• Supports RSTP redundancy
• Event notification by email, SNMP trap
• IGMP snooping – for I/O over ethernet/IP
• Supports VLANs
• QoS – 2 levels
• Configuration – Web Enabled, other software packages
• Web based configuration – using browser
• Alarm relay output for port loss, loss of power
• Redundant power inputs 12-48 VDC
• Rigid aluminum case – IP31
• DIN rail mountable
• Panel mountable – bracket furnished
• Temperature rating of -40 C to + 80 C
• UL, cUL, CE, FCC approvals
• MTBF 325,000 + hours
• 5 year global warranty
• Dimensions ( H x W x D )  5.75in x 2.0in x 4.5in     135mm x 54mm x 105mm

HME-423E | Managed Industrail Switches | Industrial Ethernet

Interface:

RJ-45 Ports: 4 10/100Base-TX auto-negotiation speed,

                      Full/Half duplex, auto MDI/MDI-X

Fiber Ports: 2 100Base-FX single-mode port (SC connector)

LEDs:Per unit: Power (Green), Power 1 (Green), Power 2 (Green),

          Fault (Red), Master (Green)

          8 10/100: Link/Activity (Green), Full duplex/Collision (Orange)

          Fiber: Link/Activity (Green)

Alarm: Relay output for port break and power failure

            Current carry ability (1A at DC 24V)

Power Input: VDC 12 to 48V

                       Redundant power with removable terminal block

Power Protection: Power Reverse Polarity

Power Consumption: 11 watts

Dimensions: IP-30 standard, 54 mm (W) x 152 mm (H) x 105 mm (D)

Installation: DIN-Rail, Panel mount or desktop

Environmental:

Operating Temp: -40 to 80

Storage Temp: -40 to 85 (-40 to 185 )

Operating Humidity: 5% to 90% RH (non-condensing)