HMG-448G | Managed Gigabit Industrial Switches | Industrial Ethernet

• For inter-connecting multiple switches with gigabit ports
• Great for Transportation, Wind Farms, where long distances are required because of mixed fiber media
• 4 TX ( RJ45 ) ports 10/100/1000    100 meter cable distance
• 4 gigabit SFP ports ( 100 or 1000 )
• Open to use any brand of SFP
• Easily replaces Modular switches
• Mix single mode and multimode fiber on the same switch
• Supports Full/Half Duplex, auto-negotiation, MDI/MDI-X on TX ports
• Supports SNMP / RMON network management
• Supports IntraVUE network software
• Supports X Ring Redundant ring on any 2 ports
• Supports RSTP redundancy
• Event notification by email, SNMP trap
• IGMP snooping – for I/O over ethernet/IP
• VLAN configuration
• QoS – 2 levels
• Configuration – Web Enabled, other software packages
• Web based configuration – using browser
• Console port for configuration
• Alarm relay output for port loss, loss of power
• Redundant power inputs 20-48 VDC
• Temperature rating of -10 C to +60 C
• UL, cUL, CE, FCC approvals
• Class 1, Div 2 approved for Hazardous environments
• Rigid aluminum case – IP31
• Dimensions: W x D x H    72mm x 105mm x 152MM

HMG-448G | Managed Gigabit Industrial Switches | Industrial Ethernet

Interface:

RJ-45 Ports: 4 10/100/1000Base-TX auto-negotiation speed,

Full/Half duplex, auto MDI/MDI-X

Fiber Ports: 4 SFP slots

LEDs: Per unit - Power (Green), Power 1 (Green), Power 2 (Green), Fault (Red),

Master (Green)

Per port - Link/Activity (Green), Speed (1000Mbps Green)

SFP - Link/Activity (Green)

Alarm: Relay output for port break and power failure

Current carry ability (1A at DC 24V)

Power Input: VDC 12-48V

Redundant power with removable terminal block

Power Protection: ESD (Ethernet)

Surge: 1500VDC

Power Reverse Polarity

Power Consumption: 17 watts

Dimensions: IP-30 standard, 72 mm (W) x 152 mm (H) x 105 mm (D)

Installation: DIN-Rail, panel mounting or desktop

Environmental:

Operating Temp: -10 to 60

Storage Temp: -40 to 85 (-40 to 185 )

Operating Humidity: 5% to 90% RH (non-condensing)