IMBA-880 | IndustrialMotherboards | Industrial Computer

• Intel® Core™ 2 Duo/ Pentium® 4/ Celeron® D LGA775 CPU up to 3.8 GHz (533/800/1066 MHz FSB)
• Intel® 945G Chipset
• DDRII 533/667 Memory, up to 4GB
• 10/100Base-TX Ethernet x 1
• Integrated GMA950 2D/3D Graphics Accelerator with
• PCI-Express [x16], VGA Support
• AC97 Audio Daughter Board (Optional)
• Ultra ATA100 x 1, SATA II x 4, CompactFlash™ Type II x 1
• USB2.0 x 8, COM x 2, Parallel x 1, IrDA x 1
• PCI, PCI-Express Expansions
• Watchdog Function 1~255 Sec.
• ATX 2.1

  IMBA-880 | IndustrialMotherboards | Industrial Computer

System

• Form Factor
  Standard ATX Form Factor
• Processor
  Intel® Core™ 2 Duo up to 2.66 GHz/ Pentium® 4 up to 3.8 GHz/ Celeron® D processor up to 3.46 GHz; LGA775 package , FSB: 533/800/1066MHz, Compatible P6 Bus protocol
• System Memory
  240-pin 1.8V DDRII DIMM Socket x 4, up to 4GB
  DDRII 533/667 Dual-channel Support
• Chipset
  Intel® 945G + Intel® 82801GB (ICH7)/ ICH7R (optional)
• Ethernet
  Intel® 82562EZ controller 10/100Base-TX, RJ-45 x 1
• BIOS
  Award Plug & Play BIOS – 8Mb ROM
• H/W Status Monitoring
  CPU Fan speed, temperature, PSU voltage
• PCI Interface
  32-bit/33MHz PCI bus supports 5 Master devices
• Expansion Interface
  PCI, PCI-Express
• Watchdog Timer
  1~255 step can be set with software on Super I/O
• RTC
  Internal RTC
• Operating Temperature
  32^oF ~ 104^oF (0^oC ~ 40^oC )
• Board Size
  12" (L) x 9.6" (W) (304.8 mm x 243.8 mm)
• Gross Weight
  0.66 lb (0.3 kg)
• MTBF (Hours)
  50,000
• Battery
  Lithium Battery

• Power Requirement
  ATX 2.1
• Power Consumption (Typical)
  95W, with Pentium® D 3.2GHz
• Operating Temperature
  32^oF ~ 104^oF (0^oC ~ 40^oC )
• Board Size
  12" (L) x 9.6" (W) (304.8 mm x 243.8 mm)
• Gross Weight
  0.66 lb (0.3 kg)
• MTBF (Hours)
  50,000

Display

• VGA Controller
  Integrated VGA on Intel® 945G core frequency up to 400MHz/PCI-Express[x16]
• Memory
  Shared memory up to 256 MB
• Resolutions
  1600 x 1200@36-bit colors for CRT

I/O: Winbond 83627

• Storage
  ATA-100 x 1 channel
  SATA II x 4
  CompactFlash™ Type II x 1 (optional)
  Standard FDD x 1, supports up to two floppy devices
• Serial Port
  COM x 2: ( Internal Pin Header x1 , External D-sub x 1 )
  COM 1, 2: RS-232/422/485
• Parallel Port
  Supports SPP/ EPP/ ECP modes
• Universal Serial Bus
  USB2.0 x 8
  5 x 2 pin-header for internal x 2
  Type-A connector onboard x 4
• PS/2 Port
  Keyboard x 1; Mouse x 1
• Audio (Daughter Board)
  AC 97 pin-header (Audio Daughter Board optional)
• IrDA
  

          IrDA Tx/Rx Header x 1